How to put up your GlawningAIR Applies to: GlawningAIR 4m GlawningAIR 5m
In short
Peg out the base, inflate it through one of the three valves to about 4 to 5 PSI, then peg out and tension the guy ropes. One person can do it in around 15 minutes.
The basics Lay the tent out with the doors where you want them and peg out the base. Close the deflate ring on the valve (see How the GlawningAIR valves work ). Inflate through whichever of the three valves is easiest to reach, to about 4 to 5 PSI. Peg out the guy ropes, with pegs angled at 45 degrees, and tension evenly. Zip on your connecting canopy and connect it to your vehicle. Pressure 4 to 5 PSI is usually enough. Raise it to around 7 PSI in wind, and keep it at the lower end in hot weather. See What pressure should my GlawningAIR be?
Watch the video
Guide to putting up your GlawningAIR (PDF) Opens in a new tab
Was this helpful?
Yes
No
Thanks for letting us know.
Sorry about that. Tell us what was missing and we'll improve this guide.
Last reviewed 8 October 2026
